On the Center Screen Computer, open the Vista app.
At the top middle bar of the Vista app, click the “Release” button to turn off the stage lights.
Now, on both of the computers, click the Apple Logo at the top left corner of the screen, then click the “Shut Down” option from the drop down.
A pop-up will appear and it will ask you if you are sure, click “Shut Down” again to confirm.
Any apps that are open may also ask you if you would like to quit, click “OK” or “Yes”.
Use the remotes located in the video rack drawer to turn off the side screens, center projector, as well as the confidence monitor on the tech booth wall.
You can also now safely turn off the video rack with this switch.
Use the drop down screen switch that is mounted near the soundboard to raise the projector screen.
On the soundboard, navigate to the last page of faders on the right bank, then mute the “Sub” and “LR” channels.
On the screen of the soundboard, click the “SETUP” button on the right side, then push in the far left knob to put the soundboard into shutdown mode.
Before turning off the soundboard, use the “PA POWER” switch located underneath the tech booth counter tor turn off the speakers.
Also before turning off the soundboard, turn off the sound rack located underneath the soundboard using the switch in the top right, as well as the amp at the bottom of the rack by holding the power button until it turns red.
We can now safely turn off the soundboard by switching the switch on the back right side.
Cover the soundboard with the dust cover to protect it as well.
If you need to turn off the house lights, you can do so by using these light switches on the wall, located directly beneath the thermostats.
Made with Bullet